PE Release Film

1. Product Description

PE3015-W is made of PE as the base material and is rolled with silicone oil applied on one side.

2. Basic Product Structure

• Polyacrylate
• Silicone release agent

3. Product Characteristics

PE3015-W is a PE release material developed by applying a silicone release agent to the original film produced by high-temperature blown film of polyethylene particles. The product features stable release force and high cleanliness. It is suitable for various foam die-cutting, frame glue die-cutting, daily chemical product adhesive surface protection, and various process protection.

4. Product Application Scope

Double-sided tape die-cutting, foam die-cutting, process transfer and waste discharge, etc.

5. Physical Parameters

6. Customizable

7. Product Usage Instructions

1. Before use, please clean the surface of the object to be pasted to remove oil, moisture, dust, and other impurities.
2. Since pressure-sensitive adhesives are used, a roller or stamping equipment must be used for full pressing during lamination.
3. The above technical data are obtained by the company using industry-recognized and reliable testing methods and do not serve as a product specification guarantee.
4. When processing conditions are strict, repeated tests should be conducted, and the product can be used only after full verification.
5. The optimal storage conditions for the product are 23 ± 5℃ and 50 ± 10% RH (Relative Humidity), with a shelf life of 6 months.
6. Storage under conditions such as direct sunlight, high temperature (above 35℃), high humidity (above 70% RH), and low temperature will not be covered by the 6-month shelf life guarantee.
7. If the surface of the object is damp, or if the product is used in a dusty, acidic, or alkaline environment, or when laminated with special materials, repeated verification is required before it can be put into use.
8. The above data are for reference only and do not provide any legally binding guarantee.