PET Protective Film

1. Product Description

PET acrylic protective film is a functional film made of PET (polyester film) as the base material, coated with acrylic glue on one side, and attached with a release film.It is mainly composed of PET substrate, acrylic adhesive layer and release film.

2. Basic Product Structure

• Acrylic
• PET Substrate

3. Product Characteristics

It features high cleanliness and good transparency, allowing for visual inspection of optical films in the bonded state. It also exhibits excellent weather resistance, heat resistance, acid and alkali resistance, stable adhesion, minimal change over time and temperature, easy peeling, and no residual adhesive residue after bonding. It also minimizes small molecule contamination and prevents dust and microparticles from being adsorbed by the product, reducing static damage to microelectronic devices.

4. Product Application Scope

It is widely used in the manufacturing and surface protection of touch screens, glass lenses, and various panels of mobile electronic products. It can also be used for surface protection during product transportation, as well as the protection of various plastic cases, keyboards, mobile phone screens, etc.

5. Physical Parameters

6. Customizable

7. Product Usage Instructions

1. Before use, please clean the surface of the object to be pasted to remove oil, moisture, dust, and other impurities.
2. Since pressure-sensitive adhesives are used, a roller or stamping equipment must be used for full pressing during lamination.
3. The above technical data are obtained by the company using industry-recognized and reliable testing methods and do not serve as a product specification guarantee.
4. When processing conditions are strict, repeated tests should be conducted, and the product can be used only after full verification.
5. The optimal storage conditions for the product are 23 ± 5℃ and 50 ± 10% RH (Relative Humidity), with a shelf life of 6 months.
6. Storage under conditions such as direct sunlight, high temperature (above 35℃), high humidity (above 70% RH), and low temperature will not be covered by the 6-month shelf life guarantee.
7. If the surface of the object is damp, or if the product is used in a dusty, acidic, or alkaline environment, or when laminated with special materials, repeated verification is required before it can be put into use.
8. The above data are for reference only and do not provide any legally binding guarantee.